Pumpkin, Inc.

Pumpkin User Forums

Running the first program

For issues specific to Microchip's PICmicro® MCUs, including compilers (e.g. HI-TECH PICC & PICC-18, Microchip MPLAB®-C18) and IDEs (e.g. Microchip MPLAB®).

Running the first program

Postby Hemanth » Fri Apr 22, 2005 2:44 am

Hi All,
i m new to salvo RTOS, i have installed the evaluation version of Salvo Lite for PICmicro(R) MCUs V3.2.3. to MPLAB V6.40. I m using HITEC PICC compiler.

I m able to open the project tu1lite.mcp provided in the tu1 tutorial.
i went through the manual and few of application notes provided in the salvo.

when building the application i m getting the following error:

Error[000] salvo ut u1sysasalvocfg.h 53 : #error: No MAKE_WITH_??? symbol defined. See salvocfg.h.
Error[000] salvo ut u1sysasalvocfg.h 59 : #error: SYSA must be defined for this PICC tutorial project ...
Halting build on first failure as requested.
BUILD FAILED: Fri Apr 22 16:13:05 2005

can anyone please help me to build this application.


Posts: 10
Joined: Thu Apr 21, 2005 11:00 pm
Location: Bangalore, Karnataka, India

Re: Running the first program

Postby aek » Fri Apr 22, 2005 10:02 am


You are using the example code which has a salvocfg.h (and other source code) that works for a large number of compilers and Salvo versions (Salvo Lite, LE, and Pro, etc.).

Add these lines to the start of your salvocfg.h:

#define SYSA 1

That is the easiest way to solve this problem.


Posts: 1888
Joined: Sat Aug 26, 2000 11:00 pm

Return to PICmicro MCUs

Who is online

Users browsing this forum: No registered users and 1 guest