Pumpkin, Inc.

Pumpkin User Forums

semaphore not working anymore (mplab update)

For issues specific to Microchip's PICmicro® MCUs, including compilers (e.g. HI-TECH PICC & PICC-18, Microchip MPLAB®-C18) and IDEs (e.g. Microchip MPLAB®).

semaphore not working anymore (mplab update)

Postby aek » Tue Mar 20, 2007 7:28 am

It ocurred to me that you might have been running a pre-3.02 version of the compiler previously -- if so, see http://www.pumpkininc.com/salvo/lite/pic/3.2/versions.txt .

------------------

-------
aek
aek
 
Posts: 1888
Joined: Sat Aug 26, 2000 11:00 pm

Re: semaphore not working anymore (mplab update)

Postby weeb0 » Tue Mar 20, 2007 8:40 am

Hi,

Since I updated for mplab 7.5 and mplab c18 3.1 the semaphore stopped to work.

Any idea?

thank you

weeb0
 
Posts: 6
Joined: Mon Mar 19, 2007 11:00 pm

Re: semaphore not working anymore (mplab update)

Postby aek » Tue Mar 20, 2007 9:19 am

No immediate ideas ... check that the incompatible optimizations are still disabled.

------------------

-------
aek
aek
 
Posts: 1888
Joined: Sat Aug 26, 2000 11:00 pm

Re: semaphore not working anymore (mplab update)

Postby weeb0 » Thu Mar 29, 2007 11:38 am

I found that the problem was occuring only when the Timer0 was enabled.

I don't understand the problem so much. If any has idea, let me know :-)

thank you

weeb0
 
Posts: 6
Joined: Mon Mar 19, 2007 11:00 pm


Return to PICmicro MCUs

Who is online

Users browsing this forum: No registered users and 2 guests

cron