Reference Document Title "CSK PSPM D" Document Number "00587B-2.SCH", Dated "December 16, 2011."
The Flight MCU schematic shows pins 93 and 94 of the PIC24F are not connected to the motherboard. If so, this means there is no connection to bits PMD0 and PMD1 of the Parallel Master Port. Thus, only 6 of the 8 bits of the PMP are useable. Is this a correct interpretation?
Unlike most of the PIC24F peripherals, it does not appear that the PMP pins are programmable. Is there a hardware or software work-around to allow connection to bits PMD0 and PMD1 of the Parallel Master Port?
Thanks!
ERAU EagleSAT