Pumpkin User Forums
PICmicro MCUs Libraries for MPLAB-C18 v3
|
UBBFriend: Email This Page to Someone! | next newest topic | next oldest topic |
Author | Topic: Libraries for MPLAB-C18 v3 |
Nandee Junior Member |
posted June 01, 2007 02:59
OK! Thank you for your quick reply! Nandee IP: |
aek Moderator |
posted June 01, 2007 02:22
Hi Nandee. All support for HI-TECH Salvo comes from HI-TECH. Ping them, tell them what you need, and they'll get the files from us and make them available to you ... ------------------ IP: |
Nandee Junior Member |
posted June 01, 2007 02:17
Hi aek! My company bought a SALVO LE edition from HI-TECH via a distributor. We got a CD with rev 3.2.3 but no patches for MPLINK 4 so I got the same error message you started the topic with. Is it possible to get the patches directly from you? I am pressed to get the SALVO work asap. Any help is appreciated! Thank you in advance! Nandee IP: |
aek Moderator |
posted February 20, 2006 09:50
OK, I emailed to your streamyx dot com email address ... ------------------ IP: |
kamyip Member |
posted February 20, 2006 02:49
Pls email to me the requiredinfo. I'll issue you a fax authorizing you to dedeuct from my credit card. IP: |
aek Moderator |
posted February 19, 2006 23:10
Hi Kam. You can buy the upgrade online at our web store here. If you'd rather not do it online, let me know and I'll email you. ------------------ IP: |
kamyip Member |
posted February 19, 2006 17:07
Ok, I'll go for the pro. Just let me know how to pay via cards. IP: |
aek Moderator |
posted February 19, 2006 11:10
Hi Kam. In your case your best bet is to upgrade from LE to Pro (currently $500). That way you get the new libraries AND the source code AND another year of tech support. ------------------ IP: |
kamyip Member |
posted February 18, 2006 21:58
Hi Andrew, I'm using Salvo LE. I do not think my password is valid anymore, which mean do I need to pay again for this upgrade? How much do I have to pay to upgrade to PRO? IP: |
aek Moderator |
posted February 18, 2006 09:43
They're in a patch file in the Lite/LE/Pro download area ... ------------------ IP: |
kamyip Member |
posted February 18, 2006 00:51
Hi Andrew, I'm going to upgrade to C18 soon couldnot locate the files that Salvo need to make it compatible with it. Pls kindly direct me to the right direction. Thanks IP: |
aek Moderator |
posted October 30, 2005 16:09
Microchip's new MPLAB-C18 v3 compiler is not object-code compatible with earlier versions (though it is source-code compatible). Therefore we've generated new Salvo libraries and posted them to the download areas. If you try to build with MPLAB-C18 v3 and the older Salvo libraries, you'll see something like this: code:The solution is to update with the salvo-lite|le|pro-pic-3.2.3-c.zip Salvo update.MPLINK 4.00, Linker ------------------ [This message has been edited by aek (edited October 30, 2005).] IP: |
All times are ET | next newest topic | next oldest topic |
©2000-2008 Pumpkin, Inc. All Rights Reserved. Pumpkin and the Pumpkin logo, Salvo and the Salvo logo, The RTOS that runs in tiny places, CubeSat Kit and the CubeSat Kit logo are all trademarks of Pumpkin, Inc. All other trademarks are the properties of their respective owners.