|
 Pumpkin User Forums
 Atmel AVR and MegaAVR
 Salvo + ICCAVR v7
|
 UBBFriend: Email This Page to Someone! |
next newest topic | next oldest topic |
| Author | Topic: Salvo + ICCAVR v7 |
|
aek Moderator |
posted June 15, 2006 13:35
  
Part of the ICCAVR 7 release makes libraries built with the earlier version of the compiler incompatible with ICCAVR v7. If you are using ICCAVR v7 and your are getting link-time errors like this one: code:then you need to upgrade your Salvo libraries to the ones in the -f.zip patch file in the Salvo for AVR download area. These libraries were built using ICCAVR v7.06A and will link correctly.!ERROR file 'inittask.o': undefined symbol 'push_gset1' Also, note that if you are using a project that was created with an earlier version of ICCAVR, be sure to remove any instances of Librray Paths (under Project -> Options -> Paths) that point to c:\icc\lib and replace them with c:\iccv7avr\lib. This will guarantee that all libraries pulled in by the linker are in for ICCAVR v7 format. ------------------ IP: |
All times are ET | next newest topic | next oldest topic |
  |
|
Contact Us | Pumpkin Home Page
©2000-2008 Pumpkin, Inc. All Rights Reserved. Pumpkin and the Pumpkin logo, Salvo and the Salvo logo, The RTOS that runs in tiny places, CubeSat Kit and the CubeSat Kit logo are all trademarks of Pumpkin, Inc. All other trademarks are the properties of their respective owners.
Ultimate Bulletin Board 5.46a