Pumpkin User Forums   Coding   Message's and const    profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic:   Message's and const
Salvo Tech Support Moderator	posted February 13, 2001 18:44             Hi ChrisV. Yes, but you must set OSBIG_MESSAGE_POINTERS to TRUE. IP: 63.203.232.106
ChrisV Junior Member	posted February 13, 2001 14:13             Is this method of passing data to the ALARM message allowed?, I have tried this and was unsucessful. const char al_zone[4]= {1,2,3,4}; OSSignalMsg(ALARM,(OStypeMsgP)&al_zone[2]); I have reverted to using a static variable in the task doing this signaling. My original goal here was to use the constant, so I could free up RAM. IP: 198.175.253.66

All times are ET	next newest topic | next oldest topic
Administrative Options: Close Topic | Archive/Move | Delete Topic
	Hop to: Select a Forum List of Forums: Category: Salvo: General --------------------AnnouncementsPre-Sales InquiriesFeature RequestsGeneralHints & Ideas Category: Salvo: Technical --------------------InstallationConfigurationCoding Category: Salvo: Target-Specific --------------------8051 familyARM (ARM7 & ARM9)Atmel AVR and MegaAVRPICmicro MCUsPIC24 & dsPICTI's MSP430TI's TMS320C2000 DSPsV8-uRISC Category: Salvo: Maintenance --------------------Service BulletinsBeta FeedbackBug Reports Category: CubeSat Kit --------------------CubeSat GeneralCubeSat ElectricalCubeSat MechanicalCubeSat Add-Ons Category: Hardware Prototyping and Development Tools --------------------PIC17C75X Protoboard

©2000-2008 Pumpkin, Inc. All Rights Reserved. Pumpkin and the Pumpkin logo, Salvo and the Salvo logo, The RTOS that runs in tiny places, CubeSat Kit and the CubeSat Kit logo are all trademarks of Pumpkin, Inc. All other trademarks are the properties of their respective owners.

Ultimate Bulletin Board 5.46a