Pumpkin GPS Receiver Module (GPSRM, also called GNSSRM)
Support directory with firmware updates, etc.
|
|
Pumpkin GPS Receiver Module (GPSRM, also called GNSSRM) Support directory with firmware updates, etc.
|
|
Note 1: Generally speaking, customers should be running the latest available firmware. Some functionality may change from one version to the next. Note 2: Install new SupMCU firmware via Pumpkin's ds30 Loader software in conjunction with the built-in SupMCU bootloader. Note 3: Erase NVM settings after loading new firmware to avoid configuration problems. Note 4: Some SupMCU modules have 512KB of flash memory, others 256KB. Customers must identify and use the firmware update that matches your SupMCU hardware. The bootloader will refuse to run SupMCU firmware that does not match the module type, hardware revision code, and flash memory size of the SupMCU. |
|
Version
|
Date
|
Notes
|
|
GPSRM1_256MC206_RevD_fw-1.3.3r0-1.6.0r2.hex
GPSRM1_512MC206_RevD_fw-1.3.3r0-1.6.0r2.hex
|
20220323
|
Flight build firmware release. Adds the ability to configure the GSPRM1 to boot with the OEM receiver powered up and the passthrough feature enabled via NVM config bit0. |
|
GPSRM1_256MC206_RevD_CFG_0x0001_fw-1.3.3r0-1.6.0r2.hex
GPSRM1_512MC206_RevD_CFG_0x0001_fw-1.3.3r0-1.6.0r2.hex
|
20220323
|
Special build of GPSRM1_NNNMC206_RevD_fw-1.3.3r0-1.6.0r2.hex that forces the OEM receiver to be on and passthrough to be enabled regardless of the setting of the NVM config bit0. |